Open the drain valve in your radiator and let the coolant pour out from the engine into a drainage bucket. Turn off the car and let the engine cool off. Coolant has a sweet smell that can attract kids and animals, but it is extremely toxic. Park your Sunfire in a safe area where you have room to work, and where pets and children will not have access to the vehicle.
HOW TO USE AVIDEMUX 2.5.4 ON HIGH SIERRA HOW TO
How to Change the Coolant for a 2001 Pontiac Sunfire Recheck your coolant reservoir level and fill the reservoir back up to the “MAX” fill line to complete the process.ģ 1/2 gallons of premixed DEX-COOL anti-freeze Start your vehicle and allow it to run for a couple minutes. Performing this step will purge the cooling system of air. Reinstall the thermostat bleed screw once coolant begins flowing out of the hole.
![how to use avidemux 2.5.4 on high sierra how to use avidemux 2.5.4 on high sierra](https://rpmsas.weebly.com/uploads/1/3/4/6/134610173/544969254.jpg)
Remove the bleed screw on the aluminum thermostat housing on the engine, connected to the upper radiator hose with an appropriate size socket and ratchet. Locate the large black upper radiator hose that attaches from the top side of the engine to the radiator. Fill the coolant reservoir with a 50/50 blend of DEX-COOL and distilled water until the anti-freeze level reaches the “MAX” line visible on the coolant reservoir. Open your vehicle’s hood and remove the coolant reservoir cap located in the engine compartment, near the passenger side front fender. Allow all the coolant in your vehicle to drain into the anti-freeze drain pan container.Ĭlose the drain by twisting it with your fingers counterclockwise after all the coolant has sufficiently drained into the container and reinstall the splash shield. Spray penetrating lubricant on the drain if you have difficulty opening it. Open the radiator's drain with your fingers, using a counter clockwise motion. Place your anti-freeze drain pan container on the ground, directly underneath the radiator's drain. The radiator drain cap has a small tab protruding from the middle designed for easy finger access. Locate drain on the bottom driver’s side portion of the radiator, facing the front of the vehicle. Place the splash shield aside along with the mounting bolts.
![how to use avidemux 2.5.4 on high sierra how to use avidemux 2.5.4 on high sierra](https://lasopaio312.weebly.com/uploads/1/2/6/2/126294250/864108804.jpg)
Remove the bolts securing the splash shield to your vehicle using an appropriate size socket and ratchet. Locate the black plastic splash shield underneath your vehicle's radiator, slightly forward of the front bumper cover.